RONDA 1032 GUCCI-2 Swiss Made Watch Movement, 2 Hands, Height 2 ( 3.41 mm )

Ronda 1032 GUCCI-2 Swiss Made Quartz MovementRonda 1032 GUCCI-2 is a Swiss Made quartz watch movement based on the RONDA 1032 Slimtech 1000 caliber. It is a 2-hand movement designed to operate hour and minute hands only. This version is listed as GUCCI-2 with height 2 and an overall height of 3.41mm, so it should be used only when the original watch requires the same hand height and case clearance. Before fitting, the watchmaker should compare the original movement, stem position, dial fitting, hand height, and available space inside the case.The official RONDA 1032 caliber is part of the Slimtech 1000 line. RONDA lists the standard movement as 3¾ x 6”’, with total dimensions of 9.00 x 13.20mm and a case fitting size of 9.00 x 13.50mm. The official base movement height is 1.95mm, and the height over the standard battery is 2.10mm. The GUCCI-2 height information in this listing refers to this supplied version and should be checked against the original movement before installation.Ronda 1032 GUCCI-2 Function and LayoutThe Ronda 1032 GUCCI-2 operates a simple 2-hand display. It is used for watches that show hours and minutes without a seconds hand and without a date display. This clean layout is common in small dress watches and compact luxury watch designs where a thin movement and minimal dial design are required. Since the movement does not include a date function, it is not suitable for watches with a working date window.The movement uses Battery 317 with 1.5V voltage. RONDA lists the caliber 1032 with 7 jewels, low current consumption, and long standard battery life. Actual battery life can vary depending on storage time, battery freshness, contact cleanliness, case condition, and temperature. For best operation, the battery contacts should be clean and the correct battery type should be installed.Replacement and Service NotesThe Ronda 1032 GUCCI-2 is used when the original movement has stopped, is damaged by battery leakage, has weak hand drive, or no longer responds correctly after fitting a correct battery. Before replacing the movement, the technician should check the crown, stem, battery, contacts, hands, dial pressure, and case condition. A poor battery contact or hands touching the dial can create symptoms similar to movement failure.Installation should be carried out by a professional watchmaker. The Ronda 1032 is small and thin, so it must be handled carefully to avoid damage to the coil, circuit, stem, and hand posts. Hands should be fitted with the correct tools and enough clearance to avoid friction. If the hands are pressed too low or installed incorrectly, the movement may stop or consume more power than normal.Compatibility and Professional ApplicationThe Ronda 1032 GUCCI-2 should be selected only when the original watch uses the same Ronda 1032 movement family and the same height requirement. The height 2 version at 3.41mm is important for hand clearance and dial/crystal spacing. A different height version may not fit correctly, even if the base caliber number is the same.Technical SpecificationsBrand: RONDACaliber: 1032Variant: GUCCI-2Line: Slimtech 1000Movement Type: Swiss Made quartzDisplay: 2 handsDate: No date displayHeight Version: Height 2Overall Height: 3.41mmOfficial Base Movement Height: 1.95mmHeight Over Standard Battery: 2.10mmSize: 3¾ x 6”’Diameter: 9.00 x 13.20mmCase Fitting: 9.00 x 13.50mmJewels: 7Battery: 317Battery Voltage: 1.5VStem Thread: 0.70mmOperating Temperature: 0°C to 50°CFunction and PurposeThe Ronda 1032 GUCCI-2 is designed to operate hour and minute hands in compatible quartz watches. It is used as a replacement when the original movement is defective, damaged, or no longer driving the hands correctly.CompatibilityCompatible with watches that require:RONDA 1032 movement familyGUCCI-2 height versionHeight 2 at 3.41mm2-hand displayNo date display9.00 x 13.20mm movement size9.00 x 13.50mm case fittingBattery 317Correct stem and hand fittingFrequently Asked Questions (FAQ)Q: What does GUCCI-2 mean in this listing? A: GUCCI-2 refers to the supplied version of this Ronda 1032 movement, listed with height 2 and overall height 3.41mm. The original movement should be matched before installation.Q: Does the Ronda 1032 GUCCI-2 have a seconds hand? A: No, this is a 2-hand movement for hour and minute hands only.Q: What battery does the Ronda 1032 use? A: The Ronda 1032 uses Battery 317 with 1.5V voltage.Q: Can this movement replace any Ronda 1032? A: It can only replace a compatible Ronda 1032 when the height version, hand fitting, stem position, case fitting, and dial layout match.Shipping & Delivery�� Phone & WhatsApp: 20 122 323 9604�� Email: [email protected]�� Email: [email protected]�� Website: https://www.swisswh.com�� Facebook: https://www.facebook.com/WatchHouseSparePartsWe offer worldwide shipping via DHL and UPS. Every order is carefully packed to ensure maximum protection during transit. Orders are dispatched within 1–2 business days, and delivery typically takes 3–7 business days depending on the destination country and customs procedures.